Video Library
Gas Humidifiers
DriSteem’s new GTS® Humidifier LX series is the only gas-fired humidifier with high-efficiency and ultra-low NOx in one unit. Our latest innovation offers a next-generation breakthrough for energy savings, installation flexibility, and environmental protection.
Get ready to install a GTS LX series gas-to-steam humidifier. Find out what tools and supplies you will need before you head over to the site, and prevent return trips.
Jim demonstrates how to tune the burner or burners on any model of DriSteem’s GTS humidifier LX series.
We made this video because we think knowing a few things about location, electrical service, fill and drain water connections, and steam piping will make your GTS humidifier LX series installation go smoothly.
Climate-controlled outdoor enclosure options, integral drain water tempering, and steam capacities from 50 to 600 pounds per hour give GTS humidifiers the flexibility to fulfill almost any humidification requirement. Customers with available natural gas or propane who require reliable steam humidification at the lowest operating cost for any application from comfort to critical will be fully satisfied with a GTS humidifier from DriSteem.
De LX-serie is onlangs aan ons GTS-assortiment toegevoegd, en combineert de grootste efficiëntie op de markt met een superlage NOx-emissie.
Notre famille de produits GTS accueille la série LX, qui combine la meilleure efficacité du marché à des émissions de NOx extrêmement faibles.
L’ultima arrivata nella nostra famiglia GTS, la serie LX, combina la massima efficienza sul mercato ed ossidi di azoto ultra-bassi in ogni singola unità .
This demonstration includes the entire tuning process and addresses the most common questions we’ve received from technicians.
Watch how easy it is, and get a few tips for upgrading a DriSteem Gas-to-Steam (GTS®) humidifier controller from Vapor-logic® version 3 to version 6. Upgrading to version 6 adds functionality and diagnostics, including a tri-color LED that conveys humidifier operating modes, demand conditions, and message alerts. Also notable for GTS is that version 6 of the controller features a cycle counter for each ignitor.
Electric Humidifiers
The RTS humidifier RX series is a line of electric resistive humidifiers with capacities and control for any application. RTS humidifiers incorporate new features that satisfy market demand while maintaining the quality and dependability you expect from DriSteem.
Prepare to install an RTS® humidifier RX Series, and learn ahead of time what to expect in terms of site preparation and tools. RTS humidifiers incorporate new features that satisfy market demand while maintaining the quality and dependability you expect from DriSteem.
RTS Humidifier RX Series Maintenance Overview
Get ready to install a Vaporstream electric humidifier. Find out what tools and supplies you will need before you head over to the site, and prevent return trips.
Prepare to run schedule maintenance on a Vaporstream electric humidifier by knowing what to expect in terms of tools, consumables, and time commitment. Learn also how to determine service intervals based on water type and the appearance of the tank and heaters.
Let Abby get you ready to install a Vapormist or CRUV electric humidifier. Find out what tools and supplies you will need before you head over to the site, and prevent return trips.
Prepare for a Vapormist or CRUV humidifier maintenance visit, and learn ahead of time what to expect in terms of site preparation and tools. Pick up on DriSteem’s recommendations for where to look and what to do before and after system shutdowns.
This simple modification to our Vapormist® humidifier supply water line is easy to do and will make tank maintenance easy to schedule and perform.
Let Abby get you ready to install a Humidi-tech or CRUV electric humidifier. Find out what tools and supplies you will need before you head over to the site, and prevent return trips.
This simple modification to our Humidi-tech® humidifier supply water line is easy to do and will make tank maintenance easy to schedule and perform.
XT Series electrode humidifiers from DriSteem offer low up-front cost, easy installation, and simple maintenance with no tank cleaning. Find out how they work and the types of applications they are best suited for.
Outdoor installation for year-round operation in extreme climates is an easy option with XT series electrode humidifiers. Watch how it’s done, and pick up a few tips and tricks.
See how DriSteem XT Series electrode steam humidifiers monitor and adjust the electrical current in the water that they boil away into steam.
Easy installation and minimal maintenance make XT Series electrode humidifier one of the most affordable humidification systems to purchase and install.
Mini-drain allows DriSteem humidifiers to produce steam continuously by draining and adding water in amounts that are too small to quench the boil. See how it works on our XT series electrode humidifiers.
Prepare to install an XT Series or XTR electrode steam humidifier, and learn ahead of time what to expect in terms of site preparation and tools. The piping, power, and control connections you will be making are also previewed.
Prepare to run schedule maintenance on an XT series electrode steam humidifier by learning ahead of time what to expect in terms of tools, consumables, and time commitment. Learn also how to determine service intervals based on steam cylinder appearance and water quality.
Steam-to-Steam Humidifier
Steam Dispersion
Steam for humidification is distributed through ducts, air handlers, and even directly into finished spaces, where it is released in the airstream with a steam dispersion system. See the difference DriSteem steam dispersion systems can make in energy savings and application versatility.
We performed a side-by-side performance test with two same-sized steam dispersion panels: our panel (Ultra-sorb® with PVDF-insulated, high-efficiency tubes) vs. a competitor’s panel.
Prepare to pay a visit to your customer’s air handler to run scheduled maintenance on an Ultra-sorb® XV steam dispersion panel. Learn ahead of time what to expect in terms of site preparation, tools, seals, and cleaners. Learn also what to look for to determine future service intervals based on the quality of the customer’s steam.
See the culmination of three decades worth of DriSteem breakthroughs in our most efficient, highest-performing steam dispersion panel.
We performed a side-by-side performance test with two same-sized steam dispersion panels: our panel (Ultra-sorb® with PVDF-insulated, high-efficiency tubes) vs. a competitor’s panel.
Evaporative Cooling & Humidification
Get ready to install an Adiatec High-pressure System. Find out what tools and supplies you will need, such as a stainless steel tubing bender and a cutter, before you head over to the site, and prevent return trips.
DriSteem’s High-pressure system is perfect for data centers with large cooling loads.
Dehumidification
Water Treatment
Get ready to install a reverse osmosis system, and learn ahead of time what to expect in terms of site preparation, tools, and the system connections you will be making.
DriSteem’s 200 Series reverse osmosis water treatment systems remove over 98 percent of dissolved solids from supply water for a wide variety of applications and processes, either as stand-alone systems or for use with DriSteem humidifiers. These systems can significantly reduce, or even eliminate, maintenance of connected equipment.
Designed for DriSteem equipment and stand-alone operation, the RO 400 Series reverse osmosis water treatment system significantly reduces or eliminates maintenance on downstream equipment by removing over 98% of dissolved solids from supply water.
Get ready to install a water softener, and learn ahead of time what to expect in terms of site preparation, softener media, and tubing/pipe connections you will be working with.
Get ready to install a dechlorinator as the upstream component of your customer’s water pre-treatment system. Find out ahead of time what to expect in terms of site preparation and tubing/pipe connections and fittings you will be working with.
This video series demonstrates techniques for accurate tests of water conductivity, pH level, total hardness, chlorides, and several other things that have a huge impact on any equipment that uses or treats water. Presented by Ryan Reimer, DriSteem Product Manager.
Click here to watch the Water Testing Mini-series on DriSteem’s Vimeo Channel
Water Tempering
Find out how our Drane-kooler water tempering device works, and understand its critical role in preventing plumbing code violations and damaged drain piping.
Click here to watch the Drane-kooler video on DriSteem’s Vimeo channel
Controls
In Standby mode, the controller is powered, but the system is offline. To enable automatic operation, such as the ability to respond to a call for humidity, the controller must be in Auto mode. See how it’s done on DriSteem’s Vapor-logic touchscreen display.
There is a simple process for keeping our Vapor-logic firmware updated to the latest version.
Click below to see instructional videos in multiple languages on DriSteem’s Vimeo Channel:
German
Spanish
French
Dutch
There is a simple process for keeping our Vapor-logic firmware updated to the latest version.
Click below to see instructional videos in multiple languages on DriSteem’s Vimeo Channel:
German
Spanish
French
Dutch
System Design
DriSteem was an early adopter of the BIM process, and we continue to expand our BIM objects and Revit file library. See how the BIM process is changing the way architects, engineers, and contractors incorporate components into their building systems.