Technical Support Quick Links

Product Literature
Access all product literature from the Product Resources page.
No log-in is needed.

Firmware Updates
Access all firmware updates. No log-in is needed.



Contact tech support button

Quick Reference Service Video Library

Our installation videos provide pre-visit information for installing contractors, such as recommended tools and supplies for specific equipment, along with what you should verify ahead of time for site readiness. The maintenance videos provide inspection and cleaning recommendations, intervals, and scope. Click below to view all the videos in this library:
   •  VIMEO

Training Videos

GTS controller upgrade and ignitor installation demo

Watch how easy it is, and get a few tips for upgrading a DriSteem Gas-to-Steam (GTS®) humidifier controller from Vapor-logic® version 3 to version 6. Upgrading to version 6 adds functionality and diagnostics, including a tri-color LED that conveys humidifier operating modes, demand conditions, and message alerts. Also notable for GTS is that version 6 of the controller features a cycle counter for each ignitor.

Humidi-tech tank change demo

This simple modification to our Humidi-tech® humidifier supply water line is easy to do and will make tank maintenance easy to schedule and perform.

Vapormist tank change demo

This simple modification to our Vapormist® humidifier supply water line is easy to do and will make tank maintenance easy to schedule and perform.

Low-maintenance humidification system components, operation, and maintenance

Our Low-maintenance humidification system combines two proven DriSteem products, the Vapormist® electric humidifier and the 200 Series reverse-osmosis system in one fully integrated package. The result? A near-zero-maintenenance humidification system. See how the components work together and how easy it is to operate and maintain the system.

Vapor-logic® Controller From Standby Mode To Auto Mode

When the Vapor-logic controller on your DriSteem equipment is in Standby mode, it will not respond to calls from downstream devices. It must be put in Auto mode. This video explains how to go from Standby mode to Auto mode, and back.

How to Tune GTS® Humidifier Burners

Share this short video with your customers, and they will learn how to tune a GTS humidifier burner for safe, efficient operation and proper steam generation. This three and half minute demonstration includes the entire tuning process and addresses the most common questions we've received from technicians. Start-up and service contractors will get the job done right the first time.



New to the world of commercial humidification and evaporative cooling systems? Looking for an easy way to better understand the products and options available for your project? Our product selection guide can help you sort through the choices and point you in the right direction.

Get Started


Get in touch with your local sales representative for more information about DriSteem products and how to proceed with project planning.

Please call us at (800) 328-4447 for assistance.

In Europe, please call +32 11 82 35 95.

Not in Fairfield, Connecticut ? Click here to find the rep nearest you.